Shipbuilding
Magnetic solutions for shipyard applications and underwater welding
Magswitch makes shipbuilding more efficient: Based on our switchable magnets, we have developed products that meet the challenges of shipbuilding and support you in your daily work. Welding steel beams and processing thick-walled sheets is simplified with Magswitch products, and they also represent a further development in terms of workplace ergonomics in a shipyard. Safe magnetic grounding during underwater welding is part of the requirements for Magswitch products, as is the handling of steel plates and L-beams.
Discover our solutions now for greater safety and efficiency in your shipyard.
Application areas: Clamping, welding, bridge construction, shipbuilding, hall construction
BeamJacks
The Magswitch Beam Jack assists you in welding steel beams in general mechanical engineering and shipbuilding. The combination of powerful switchable magnets with a hydraulic pump significantly increases your efficiency when tack welding, spot welding, and welding long steel beams.
The Beam Jack series has already supported numerous reference projects in shipbuilding and in the production of welded structures in bridge construction.
This unique welding tool is available with holding forces up to 5500kg and revolutionizes the work of welding large sheets, steel plates and L-beams.
- Suitable for large and heavy workpieces
- Easy handling thanks to switchable ON/OFF magnets
- Workplace-appropriate welding of steel beams
- Safe spot welding of large sheet metal beam connections
Applications: Woodworking, clamping, clamping, welding
MagJigs
It's a kind of MagJig! Secure your fixtures effortlessly and safely. Simply twist the
Press the button and let the tool do the work. Drill a hole in the fixture and insert it.
Insert the MagJig to use it for clamping.
• Adheres to flat and round metallic surfaces
• 1.9 cm wide standoffs for flush mounting
• With vertical through-holes to secure the device
• Ideal for woodworking, welding and clamping
Applications: Woodworking, clamping, clamping, welding
MagJigs
It's a kind of MagJig! Secure your fixtures effortlessly and safely. Simply twist the
Press the button and let the tool do the work. Drill a hole in the fixture and insert it.
Insert the MagJig to use it for clamping.
• Adheres to flat and round metallic surfaces
• 1.9 cm wide standoffs for flush mounting
• With vertical through-holes to secure the device
• Ideal for woodworking, welding and clamping
Applications: Underwater welding, shipbuilding, pipe welding
MagTethers
Magswitch MagTethers are innovative, switchable magnetic grounding clamps for underwater welding. Made from corrosion-resistant material, the ON/OFF magnet provides fast and reliable grounding.
With a holding force of up to 454 kg, the mass can be held securely even underwater at any time.
This is guaranteed. The switchable magnet facilitates handling during the hyperbaric process.
Welding simplifies and supports the welder in his work.
Due to their special geometry, MagTethers offer significantly better grounding than ground clamps and grounding pliers on round surfaces. This also applies to...
Pipe welding is easier to perform underwater.
- Strong adhesion to any ferromagnetic surface
- no residual magnetism
- Precise handling thanks to switchable ON/OFF magnets
- lightweight and flexible in its application
Applications: Underwater welding, shipbuilding, pipe welding
MagTethers
Magswitch MagTethers are innovative, switchable magnetic grounding clamps for underwater welding. Made from corrosion-resistant material, the ON/OFF magnet provides fast and reliable grounding.
With a holding force of up to 454 kg, the mass can be held securely even underwater at any time.
This is guaranteed. The switchable magnet facilitates handling during the hyperbaric process.
Welding simplifies and supports the welder in his work.
Due to their special geometry, MagTethers offer significantly better grounding than ground clamps and grounding pliers on round surfaces. This also applies to...
Pipe welding is easier to perform underwater.
- Strong adhesion to any ferromagnetic surface
- no residual magnetism
- Precise handling thanks to switchable ON/OFF magnets
- lightweight and flexible in its application
Applications: Underwater welding, shipbuilding, pipe welding
MagTethers
Magswitch MagTethers are innovative, switchable magnetic grounding clamps for underwater welding. Made from corrosion-resistant material, the ON/OFF magnet provides fast and reliable grounding.
With a holding force of up to 454 kg, the mass can be held securely even underwater at any time.
This is guaranteed. The switchable magnet facilitates handling during the hyperbaric process.
Welding simplifies and supports the welder in his work.
Due to their special geometry, MagTethers offer significantly better grounding than ground clamps and grounding pliers on round surfaces. This also applies to...
Pipe welding is easier to perform underwater.
- Strong adhesion to any ferromagnetic surface
- no residual magnetism
- Precise handling thanks to switchable ON/OFF magnets
- lightweight and flexible in its application
Applications: Welding, shipbuilding, steel construction
Stiffeners
Magswitch stiffeners are switchable, magnetic 90° angle stops for heavy-duty welding applications. With a magnetic holding force of over 1000 kg, they are the perfect magnetic welding angles for demanding use.
Thanks to the Magswitch ON/OFF magnet, these clamping angles are the perfect welding tool for heavy-duty applications. Magswitch stiffeners can be easily and precisely positioned in the OFF position. In ON mode, they guarantee a secure hold on flat and round ferromagnetic surfaces with a holding force of 545 kg or 1091 kg, depending on the model.
- Heavy duty magnetic welding tool
- effective and robust
- no residual magnetism
- Precise positioning through switchable ON/OFF magnets
Applications: Welding, shipbuilding, steel construction
Stiffeners
Magswitch stiffeners are switchable, magnetic 90° angle stops for heavy-duty welding applications. With a magnetic holding force of over 1000 kg, they are the perfect magnetic welding angles for demanding use.
Thanks to the Magswitch ON/OFF magnet, these clamping angles are the perfect welding tool for heavy-duty applications. Magswitch stiffeners can be easily and precisely positioned in the OFF position. In ON mode, they guarantee a secure hold on flat and round ferromagnetic surfaces with a holding force of 545 kg or 1091 kg, depending on the model.
- Heavy duty magnetic welding tool
- effective and robust
- no residual magnetism
- Precise positioning through switchable ON/OFF magnets
Applications: Welding, shipbuilding, steel construction
Stiffeners
Magswitch stiffeners are switchable, magnetic 90° angle stops for heavy-duty welding applications. With a magnetic holding force of over 1000 kg, they are the perfect magnetic welding angles for demanding use.
Thanks to the Magswitch ON/OFF magnet, these clamping angles are the perfect welding tool for heavy-duty applications. Magswitch stiffeners can be easily and precisely positioned in the OFF position. In ON mode, they guarantee a secure hold on flat and round ferromagnetic surfaces with a holding force of 545 kg or 1091 kg, depending on the model.
- Heavy duty magnetic welding tool
- effective and robust
- no residual magnetism
- Precise positioning through switchable ON/OFF magnets
Application areas: Welding, bridge construction, shipbuilding, steel construction
MagPress
Magswitch MagPress is a novel tool to assist you in welding flat steel and thick-walled sheets.
The switchable magnet with its holding force of 465kg in combination with the stable handle generates a large leverage force to effectively bridge the air gap in steel beams and sheets.
Increase the effectiveness of your work with the switchable welding magnet and simultaneously improve workplace ergonomics during welding.
- novel magnetic welding tool
- effective and robust
- Workplace-appropriate welding of steel sheets
Applications: Shipbuilding, welding
MagPress
The Magswitch MagPress allows for the precise alignment of large steel sheets. Easily compensate for differences in the gaps by placing the magnet deep inside and levering upwards.
and weld.
- lightweight and compact
- Turn the lever to the side and use the tool as a beam press for 10-15 cm thick beams.
Beams can be pressed
Areas of application: Woodworking
MagPress
The Magswitch MagPress allows for the precise alignment of large steel sheets. Easily compensate for differences in the gaps by placing the magnet deep inside and levering upwards.
and weld.
- lightweight and compact
- Turn the lever to the side and use the tool as a beam press for 10-15 cm thick beams.
Beams can be pressed
Welding bestsellers
5 Tools Bundle
Benefits
Sustainability
Safety
Our success
