Magswitch T30 pneumatic magnetic gripper
Magswitch T30 pneumatic magnetic gripper
Article number: 81401124
The T30 is compact and powerful, featuring state-of-the-art technological enhancements and precise mounting interfaces. This tool is ideal for fixtures, pin positioning, and handling thin workpieces. Additionally, a customizable pole shoe geometry provides maximum flexibility for a wide range of applications. Tailor this tool to your specific requirements by contacting our engineering team at applications@magswitch.com contact.
FEATURES & BENEFITS
- Larger air connections (G1/8) for increased compatibility and robust connections
- Manufactured with precision tolerances and equipped with symmetrical NAAMS mounting
- The tool is equipped with an externally accessible manual override.
- In case of power outages or maintenance inspections, the external manual override is available – it saves the day!
ACCESSORIES (SOLD SEPARATELY)
Table – Accessories & Kits for T30
| Product SKU | Product Name |
|---|---|
| 8800699 | T30 Prox Cap Kit |
| 8800747 | T30 Pin Clamp Pole Shoe Kit |
| 8800696 | T30 Standard Pole Shoe Kit |
| 8800943 | POLE SHOE KIT, T30, V-CUT 135 DEG |
| 8800756 | POLE KIT, T30, TOOTH 2X2X2 |
| 88001440 | ARMOR KIT, T30, BIN PICKING KIT |
| 88001441 | PSK, T30, FLAT POLE SHOES, ARMOR READY |
| 88001442 | PSK, T30, 135deg V-CUT POLE SHOES, ARMOR READY |
| 88001443 | PSK, T30, 155deg V-CUT POLE SHOES, ARMOR READY |
| 8800501 | Ball Mount, NAAMS, 28.5mm, Kit |
| 88001228 | T30, LASER WELD COPPER SHIELD W/ PORT COVER KIT |
| 8800973 | BRACKET KIT, T30, REPLACE AR30 NAAMS KNE |
| 8800972 | BRACKET KIT, T30, REPLACE AR30 NAAMS KNS |
| 88001017 | BRACKET KIT, T30, REPLACES AR30 NAAMS, FRONT HOLES |
| 88001001 | BRACKET KIT, T30, REPLACES AR30 NAAMS, TOP HOLES |
*Pole shoes are required. Not included in the basic tool kit.
SPECIFICATIONS – T30
General Specifications
| parameter | Value |
|---|---|
| Maximum pull-off force ¹ ² | 161 lb / 73 kg |
| Maximum shear force ¹ ² | 38.8 lb / 17.6 kg |
| Minimum material thickness for unstacking ³ | 0.197 in / 5 mm |
| Maximum permissible pressure | 90 psi / 0.62 MPa |
| Minimum actuation pressure | 21.76 psi / 1.5 bar |
| Maximum actuation pressure | 89.92 psi / 6.2 bar |
| Dead weight | 1.33 lb / 605 g |
| Air connection thread | 2 × G1/8 |
| Mounting options | Top: Ø8–M8–Ø8–M8 Page: 2 × Ø6–M8–Ø6 |
| Magnetic pole surface | 54 × 31 mm |
Material thickness → Maximum force
| Material thickness mm (in) | Maximum force kg (lbs) |
|---|---|
| 0.5 (0.019) | 6.63 (15) |
| 1.0 (0.039) | 18.23 (40) |
| 2.0 (0.078) | 34.03 (75) |
| 3.0 (0.118) | 54.6 (120) |
| 4.0 (0.157) | 62.87 (138) |
| 5.0 (0.196) | 70.63 (155) |
| 6.0 (0.236) | 73.07 (160) |
Required air pressure ⁴
| Material thickness mm (in) | Required air pressure bar (psi) |
|---|---|
| 0.5 (0.019) | 3.9 (58) |
| 1.0 (0.039) | 2.75 (40) |
| 2.0 (0.078) | 1.8 (26) |
| 3.0 (0.118) | 1.5 (21) |
| 4.0 (0.157) | 1.5 (21) |
| 5.0 (0.196) | 1.5 (21) |
| 6.0 (0.236) | 1.5 (21) |
SWL (Sustainable Working Load) = Maximum Force⁵ / Safety Factor (≥ 5)
¹ Determined in a laboratory setting on 2" (5.08 cm) thick SAE1018 steel with a surface roughness of 63 microinches and optimized pole shoes. Many factors affect the actual pull-off force and allowable working load in any application. Consult a Magswitch application engineer and test the Magswitch in any application prior to use.
² All data refers to a device with installed flat pole shoes.
³ Measured using SAE1018 steel, length = 200 mm, width = 200 mm.
⁴ Values may vary by +/- 5%.
⁵ The maximum forces listed above are not safe working forces. The designer must consider the safety factor when designing the tool. Magswitch recommends a SWL ratio of 5:1 for most applications.
Benefits
Sustainability
Safety
Our success
